Homes in Shenandoah range from established residential properties to newer construction, and the electrical needs that come with them vary just as much. Ranes Electric handles fault finding, panel work, wiring, and installation for homeowners and property managers throughout the town and the surrounding area. Whether the call is about a breaker that will not stay reset, an older home that needs its wiring looked at, or a new circuit for a garage or outbuilding, we take it from the first call through the finished job.
Landlords with rental properties and businesses operating in the area call us for the same reason homeowners do: something needs to be handled correctly and on a schedule that works. We are available every day from 9 AM to 11 PM, and same-day appointments are often available. The price is confirmed before anything is scheduled. Call (936) 241-9792 and we will walk through what the job involves.
Commercial premises in Shenandoah have a different set of demands than a single-family home. A business that has to stay open during the day needs electrical work planned around its operating hours. That might mean scheduling after close, working in stages so part of the site stays live, or coordinating with a property manager who is responsible for multiple tenants.
We handle that kind of planning before the work starts. The scope is confirmed, the timing is agreed on, and the work is done in a way that minimizes disruption. Panel upgrades, dedicated circuits for equipment, lighting installation, and commercial fault finding are all jobs we take on for businesses in the area. Qualified electricians for every job, whether it is a single outlet in a back office or a full panel replacement in a commercial space.
We show up ready to work.
The cost of electrical work depends on what the job actually involves. A panel assessment that turns up a failing breaker and nothing else is a different scope than a panel upgrade with a load calculation and a new service entrance. A single GFCI outlet in a bathroom is a different afternoon than rewiring a detached garage.
When you call, we ask about the situation, and we give you a rate for what we are looking at before anything is scheduled. You are told what that price covers. If we get on site and find something that changes the scope, we explain what we found and confirm the updated price before continuing. Nothing is added to the bill without that conversation first.
What tends to affect a quote includes the condition of the existing wiring, whether the panel has capacity for what is being added, how accessible the run is, and whether any code compliance work is needed alongside the main job. Ask what it covers and you get a straight answer. Call (936) 241-9792 to get the conversation started.
No matter what's going wrong with your wiring, the first step is tracing the problem to its actual source. Intermittent trips, outlets that have gone dead, and lights that flicker under load all have a cause, and that cause is not always where the symptom shows up. We start at the panel, work outward through the circuit, and test each possibility in order before settling on a fix.
Older properties sometimes turn up with wiring that has been added to in pieces over the years, which makes fault finding more involved. GFCI and AFCI protection devices are part of what we check, because a tripped GFCI in one room can kill power to an outlet in another. Wiring work is checked against code before sign-off.
A home that was built or last updated when the electrical load was lighter may be running a panel that cannot carry what the household puts on it today. Breakers that trip under normal use, lights that dim when a large appliance starts, and no room to add circuits are all signs the panel has reached its limit.
We run a load calculation before recommending an upgrade, so the new service is sized for what the home actually needs. If a panel replacement is the right call, we handle the full scope from the permit through the final inspection. We stand behind every circuit we touch.
Adding a circuit for a new appliance, a home office, an EV charger, or a detached structure is a different kind of job than a repair, but it starts in the same place: confirming the panel has the capacity to carry what is being added. If it does not, we address that first. If it does, we run the circuit, size the breaker correctly, and confirm the wiring meets current code.
The service page carries the full breakdown of installation work and what each type of job involves.
Same-day appointments are often available for Shenandoah residents, and we are open every day from 9 AM to 11 PM. For a problem that cannot keep, call (936) 241-9792 and describe what you are seeing. We will advise on next steps and get someone scheduled as quickly as the situation calls for.
For rental properties and businesses, we work around tenant schedules and operating hours. A landlord who cannot have a unit without power for two days and a business that cannot shut down its kitchen circuit mid-service both need the job planned differently than a straightforward home repair. We account for that before the visit, not after.
Fast turnaround. Fair pricing. Safe results.
An intermittent trip is one of the harder problems to pin down because it does not always reproduce on demand. We document what the circuit is carrying, test the connections, and look for heat signatures and arc-fault conditions that point to where the fault is actually happening. We are accountable to the community we work in, and that means not closing up a wall until we are confident the fix is the right one.
The region sees severe thunderstorms and occasional ice events that take the grid down for hours or longer. A standby generator with a properly installed transfer switch keeps critical circuits running when utility power fails. We handle the electrical side: the transfer switch, the wiring between the generator connection and the panel, and the grounding and bonding that make the system safe. The transfer switch is what keeps the generator isolated from the utility line, which matters for the equipment and for anyone working to restore power outside.
A standard outlet swap is quick, but it is not always simple. Aluminum wiring remediation, for example, requires specific connectors and techniques at every device, not just a direct replacement. GFCI outlets in kitchens, bathrooms, garages, and exterior locations have to be wired correctly to trip when they should. We confirm what is behind the wall before we close it back up.
A safety inspection is worth scheduling before buying an older property, after a significant storm, or when a home has not been looked at in years. We check the panel, the grounding and bonding, GFCI and AFCI protection, and the condition of visible wiring. The report gives you a clear picture of what is there and what, if anything, needs attention.
Low-voltage work covers the wiring that does not carry line voltage but still has to be run cleanly and in the right places. Doorbell wiring, data drops, and structured wiring rough-in for new construction or a remodel all fall into this category. We handle the rough-in so the finish work goes in correctly.
A detached garage or workshop that needs more than a single circuit gets a subpanel fed from the main panel in the house. The subpanel gives the outbuilding its own breaker slots and keeps the loads on the main panel manageable. We size the feeder wire and the subpanel for what the space actually needs, including dedicated circuits for larger equipment and EV charger circuits where that is part of the plan.
Shenandoah is part of Montgomery County, and we cover the surrounding communities throughout the area. If you are in a neighboring town and are not sure whether you are in our service area, call (936) 241-9792 and we will confirm.
Towns we serve alongside Shenandoah include:
Reach out and we'll start at the panel.
For what the job actually entails, the electrical services page lays it out.
Either works. Tenants can call (936) 241-9792 directly to describe the fault. If the property is managed, we confirm the authorization and billing arrangement before scheduling, so the right person is in the loop before work begins.
Extension cords used as permanent wiring are a fire risk, and we address the underlying cause rather than just removing the cords. That usually means adding outlets where they are actually needed or running a dedicated circuit to the area so the load has a proper permanent path.
Properties in a town this size often have wiring that has been added to in stages over the years, sometimes without documentation of what was done or when. That can mean circuits that are undersized for current loads, panels without room to add breakers, or older wiring types that need assessment before any new work is added to the system. A safety inspection is a straightforward way to find out what is actually there.
Yes. We cover Shenandoah and the surrounding communities throughout Montgomery County, including Oak Ridge North, Grangerland, Porter Heights, Woodloch, and The Woodlands. Call (936) 241-9792 and we will confirm coverage for your address and get the conversation started.
Buyers and their inspectors commonly ask about the panel age and capacity, the presence of GFCI and AFCI protection, whether the wiring is aluminum or copper, and whether any unpermitted electrical work has been done. A pre-sale inspection gives sellers clear answers to those questions before they come up in a buyer's report.
We tell you before we continue. If we open a wall or start at the panel and find something that changes the scope, we explain what we found and confirm the updated price before any additional work begins. You are not presented with a different bill at the end.
Not necessarily. Whether a commercial space needs to close depends on which circuits are being de-energized and for how long. We assess the scope before scheduling and work with the business to plan around operating hours where that is possible.
A dryer requires a dedicated 240-volt circuit sized for the appliance load, run directly from the panel. A standard 120-volt outlet on a shared circuit cannot carry that load safely, and plugging a dryer into one is a fire and tripping risk.
Permit requirements depend on the type and scope of the work and whether it involves the main service entrance or structural changes to the electrical system. We handle the permit process as part of the job when one is required. When you call, we can walk through what the job involves and whether a permit applies to your situation.
A workshop typically needs dedicated 240-volt circuits for larger tools, enough 120-volt circuits to run multiple pieces of equipment without overloading a single circuit, and adequate lighting. If the workshop is in a detached building, a subpanel fed from the main panel is often the right approach, sized for current and future load.
Schedule it. We wire it. You're powered.
Ranes Electric handles electrical repairs, panel work, and installations for homes and businesses throughout Shenandoah and the surrounding Montgomery County area. Call (936) 241-9792 for a quote. We are available every day from 9 AM to 11 PM, and same-day service is often available.
Nearby towns we cover: Oak Ridge North, The Woodlands, Tomball, Cleveland.
Everywhere else we go is in our service area list.
Every electrical job is different, and the right fix depends on what is actually happening in your system. The table below covers the services we handle most often in Shenandoah and Montgomery County, what each one involves, and a practical note to help you decide where to start. Call (936) 241-9792 for a quote on any of them before anything is scheduled.
| Service Type | Scope of Work | Common Situations | What to Keep in Mind |
|---|---|---|---|
| Whole-Home Surge Protection | panel-level surge device installationprotection for every outlet and circuitlightning and utility-switching coveragesingle installation, whole-house coverage | Homes with modern electronics, smart appliances, or frequent storm exposure | Southeast Texas sees significant lightning activity. Panel-level protection catches a spike at the service entrance before it reaches any device in the house. |
| Outlet & Switch Installation | standard and GFCI outlet replacementdimmer and standard switch installationoutdoor weatherproof outletsgarage and exterior locations | Homeowners upgrading outlets or replacing failed devices | A GFCI outlet installed incorrectly may not trip when it should. Proper installation matters as much as the device itself. |
| Electrical Safety Inspections | pre-purchase and pre-sale inspectionsGFCI and AFCI protection reviewpanel and grounding assessmentcode violation documentation | Buyers, sellers, landlords, and lenders requiring documentation | An inspection before closing on an older Shenandoah property gives you a clear picture of what the system looks like before you own the problem. |
| Electrical Repairs & Troubleshooting | dead outlets and partial power losstracing faults to the sourcearc-fault and ground-fault diagnosisGFCI and AFCI device testing | Any home or business with an unexplained electrical problem | A proper diagnosis starts at the panel and works outward. Guessing and replacing parts at random costs more in the long run. |
| Electrical Panel & Service UpgradesMost Popular | 200-amp service upgradespanel replacement and breaker upgradesload calculation before sizingsubpanel installation | Homes with tripping breakers, dimming lights, or no room to add circuits | Many Shenandoah homes were built with 100-amp service. Modern loads from central AC, electric ranges, and EV chargers can push that service to its limit. |
| Older-Home Rewiring | whole-home rewiringaluminum wiring assessmenttwo-prong outlet groundingknob-and-tube evaluation | Older Montgomery County properties with outdated or inconsistent wiring | Aluminum branch wiring and ungrounded two-prong outlets are not automatic emergencies, but all of them deserve a clear-eyed look from a qualified electrician. |
| Wiring & Circuit Installation | new circuit runsgrounding and bonding workwiring for additions and remodelscode-compliant tie-in to existing system | Additions, remodels, or any space that needs new wiring | Wiring work is checked against code before sign-off. If the panel cannot carry the added load, we say so before work begins. |
| EV Charger Installation | dedicated 240-volt circuitpanel capacity assessmentoutlet or hardwired charger connectiongarage and exterior runs | Electric vehicle owners adding a Level 2 charger at home | If the panel needs room added before the charger can go in, we handle that as part of the same project so there is one clear scope and one call. |
| Lighting Installation | recessed and surface-mounted fixturespendant and chandelier wiringsecurity and landscape lightingunder-cabinet lighting | Homeowners remodeling or adding exterior lighting for safety | Outdoor lighting in Shenandoah sees year-round use. A weatherproof fixture installed correctly the first time avoids callbacks. |
| Breaker & Fuse Repair | breaker replacementtripping breaker diagnosisfuse panel assessmentload testing | Properties where a breaker trips repeatedly or will not reset | A breaker that trips immediately under load tells us something different than one that trips after extended use. Both get resolved, but the path is different. |
| Dedicated Appliance Circuits | refrigerator and dishwasher circuitsmicrowave and range circuitsworkshop and garage equipmentcircuit sizing for the specific load | Appliances that share a circuit and cause repeated tripping | A shared circuit that trips under normal appliance use is a sizing problem, not just a nuisance. A dedicated circuit fixes it at the source. |
| Ceiling Fan Installation | new installations where no wiring existsreplacement of older fansswitch leg wiringbox and brace support | Homeowners adding fans in bedrooms, living rooms, or covered patios | If no wiring exists at the location, we run the circuit and the switch leg as part of the same visit. |
| Backup Generator Installation | transfer switch installationdedicated wiring to the panelgrounding and bondingutility line isolation confirmation | Properties in areas with storm-related outages or extended grid stress | The transfer switch is what keeps the generator isolated from the utility line. Correct installation protects both the equipment and utility workers restoring power. |
Call (936) 241-9792 to talk through any job on this list and get a quote before anything is scheduled.
(936) 241-9792